Bike's clutch plate gets damaged quickly, so what things should be kept in mind

If carelessness is taken while riding the bike, then gradually many parts of the bike start getting damaged. In such a situation, the clutch plate of the bike also gets damaged again and again. So what kind of carelessness can be avoided?

Be careful while changing gears
When the bike is at high speed, the speed of the vehicle should also be reduced to change lower gear. Without doing this, changing gears at high speed causes damage to both the clutch and the gear. Therefore, first reduce the speed of the bike and then change the gear. Only after doing this the clutch should be released.

Use brakes properly
It is often seen that people are riding a bike at high speed and if they have to stop the bike suddenly, they use the clutch after applying the brakes very fast. But doing so can quickly damage the clutch plate and brakes. Therefore, first reduce the speed of the bike and then use the clutch and brake to stop.

Keep better coordination
Many times people ride the bike by half pressing the clutch. Or some people press the clutch repeatedly and accelerate the accelerator. Doing this increases the risk of damage to the clutch plates. If you ride the bike carelessly for a long time, the clutch plate may get burnt. This can also cause major problems during the journey.

Keep in mind to drive slowly
If you are riding a bike at low speed then you should not press the brake first. If brakes have to be applied then first press the clutch lightly and then use the brake. By doing this there will be no damage to the clutch of the bike and it will also not have any bad effect on the engine.